New Disc-anchor seeder Green Plains TSM PRO 3,9 with variators combine seed drill
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+380 97 423...
+380 97 423 2814
+380 67 177...
+380 67 177 0719
Ukraine 
39.37 ft
Ukraine, m.Dnipro
24.11 ft
Ukraine, m.Dnipro
Ukraine, m.Dnipro
Ukraine, m.Dnipro
Ukraine, m.Dnipro
9.84 ft
Ukraine, m.Dnipro
5.91 ft
Ukraine, m.Dnipro
Ukraine, m.Dnipro
Ukraine, m.Dnipro
Ukraine, m.Dnipro
Ukraine, m.Dnipro
12.8 ft
Ukraine, m.Dnipro
Ukraine, m.Dnipro
Ukraine, m.Dnipro
Ukraine, m.Dnipro
9.84 ft
Ukraine, m.Dnipro
13.12 ft
Ukraine, Novgorodka
29.53 ft
Ukraine, pgt. Yubileynoe
19.69 ft
Ukraine, Kyiv
Ukraine, Kyiv
Designed for direct sowing of all types of grain, as well as for classical technology, mini-till and no-till.
Technical characteristics of the Green Plains TSM PRO 3.9 m seeder with variators:
Type ... mechanical
Aggregation method ... semi-mounted
Productivity at a speed of 10 km/h, ha/h ... 3
Transport height, m ... 3.36
Transport width, m ... 4.05
Transport length, m ... 6.1
Working width, m ... 4
Working length, m ... 6.1
Seeder weight (unloaded), t ... 5
Number of coulters, pcs ... 16
Number of coulter rows, pcs ... 2
Distance between coulters, mm ... 250
Required tractor power, hp ... 80
For deep processing, it is recommended, h.p. ... 100
Operating speed, km/h ... 7-10
Transport speed, km/h ... 20
The minimum number of pairs of tractor hydraulic outlets, pcs ... 1
Pressure in the hydraulic system of the tractor, bar ... 180
Hopper capacity 60/40, l ... 1500
Seeds, l ... 1000
Fertilizers, l ... 500
Application rate:
Seed min/max, kg/ha ... 7/400
Fertilizers min/max, kg/ha ... 7/300
Seeding rate adjustment ... variator
Support wheels ... 10.0/75-15.3 (14PR)
Tire pressure, bar ... 2.8 - 3.2
Tractor hitch ... Two-point NU-2
Hydraulic requirement: raise/lower ... 1 double acting spool
Depth of introduction of seeds/fertilizers, mm... 20-100
Depth adjustment ... Set of clips 50/30/19/10/7mm for hydraulic cylinder rods
Equipped with a unique disk-anchor coulter of our own design with a seeding width of 14 mm.
Designed for use in direct sowing seeders, as well as for mini-till and no-till technology.
The coulter is equipped with a cutting disc that cuts crop residues and plant roots that are in the surface layer of the soil.
Support wheels are installed next to the cutting disk, which, in addition to copying the microrelief of the field, press down crop residues, making it easier to cut them, and compact the soil surface, which allows the anchor to prepare a neat furrow with less loosening of the soil.
Following the anchor is a plastic seed and fertilizer compactor that presses the seeds tightly to the bottom of the furrow, ensuring their guaranteed contact with moist soil.